NEW PRODUCTS
Custody Transfer flowmeter Calibration Kit
Martel’s
custody transfer flowmeter calibration kit for the BetaGauge 330-30 adds a
high range pressure module and LTP100A RTD probe to the standard calibrator.
The integral pump and internal sensor are used for the differential
calibration portion of the flowmeter. A high pressure external sensor is
used for the static portion, and the RTD provides the data for the
temperature compensation calibration of the flowmeter. In addition,
it all fits in the normal carrying case for the 330.
www.technical-sys.com
techniCAL Systems 2002
Motor Contactors include higher voltages
AutomationDirect’s
offering of Fuji electric contactors now includes higher coil voltages. The
new SC series components operate with AC coil voltage ranges of 440-480V and
500-550V at 60hz and are available in frame sizes of 43mm, 54mm and 67mm. SC
series SUPERMAGNET™ Coil contactors now include 88mm, 100mm and 115mm frame
models with AC coil voltage ranges of 380-450V and 460-575V at 50/60hz. Also
now available with SUPERMAGNET coils are the Odyssey series contactors in
138mm and 148mm frame sizes, with AC coil voltage ranges of 380-450V and
460-575V at 50/60hz.
www.automationdirect.com
AutomationDirect
Gauge Provides Low Differential Pressure Measurement In High
Static,
Wet-wet Pressures Applications
Ashcroftâ
Type 5503 differential pressure gauge provides reliable low differential
pressure measurement in high static, wet-wet pressure applications. Equipped
with wetted materials of 316SS, Monel or Hastelloy C, the rugged Type 5503
D/P pressure gauge is specifically designed to monitor a wide variety of
caustic liquids and gases. The Type 5503 has 4 in. and 6 in. dial face
versions available in ranges from 0/3 (or 0/100 In H2O) through
0/400 psid. Optional features include 3,625 psi static pressure containment,
liquid fill, electrical contacts and a choice of mounting hardware.
www.ashcroft.com
Ashcroft
Liquid Level Displacer Transmitter uses simple buoyancy
principle
Digital
E3 Modulevel® Liquid Level Displacer Transmitter is an advanced,
intrinsically safe two-wire instrument utilizing simple buoyancy principle
to detect and convert liquid level changes into a stable output signal. The
linkage between the level sensing element and output electronics provides a
simple mechanical design and construction. The vertical in-line design of
the transmitter results in low instrument weight and simplified
installation. The instrument comes in a variety of configurations and
pressure ratings for varied applications. The Digital E3 Modulevel has
microprocessor-based electronics with 4-20 mA/HART® or FOUNDATION fieldbus™
output. E3 supports the FDT/DTM standard and a PACTware™ PC software package
allows for additional configuration and trending capabilities. Features
include: two-wire, loop-powered, transmitter for level, interface or density
measurement; no level change needed for configuration; no field calibration
necessary; Safety Integrity Level (SIL) value of 2, SFF value of 92.3%; 4–20
mA output signal; and two-line, 8-character LCD and 3-button keypad.
www.magnetrol.com
Magnetrol
HEAVY-DUTY ROD LOCKS PROVIDE
PRECISION HOLDING WITH MINIMAL BACKLASH
RLSS
Series Rod Locks deliver superior holding capabilities with extremely low
backlash for demanding linear motion control applications where high
accuracy is required. The spring-engaged, air-released series – available in
a wide array of standard and custom sizes – features a wide clamping surface
to ensure high holding forces even during power/pressure loss, providing
reliable precision gripping of up to 5,026 lb., depending on the model. The
rugged RLSS Rod Locks ensure accurate positioning and holding while other
operations are performed. They utilize numerous ball bearings to transfer
the spring force onto the clamping collar, resulting in large clamping areas
designed to provide a uniform force to the contact area on every engagement.
This allows the lock to engage without any rod displacement. Additionally, a
cam operated manual release feature mechanically disengages the rod lock
with no special tools required – just a simple turn of a hex screw using a
standard wrench. The default-to-lock function springs back to the engaged
position when released. Available in ISO and NFPA sizes, robust Nexen RLSS
Series Rod Locks are IP67 rated and withstand harsh industrial environments,
including washdown applications.
www.nexengroup.com
Nexen Group
High Security Server Cabinets Offer Strength and Stability
TS8
high security server cabinets offer strength and stability for virtually any
server environment. Built with Rittal’s patented 16-fold continuously welded
frame, the TS8 Server cabinet delivers more dimensional stability while
providing 1 metric tonne load of carrying capability. The TS 8 also
incorporates sufficient depth to enable larger servers to be installed
whilst leaving ample space in the rear for cable routing. It can easily be
bayed without the need for any expensive intermediate frames. Available in
various heights and depths, standard TS 8 enclosures offer protection
category IP 55 and comply with NEMA 12. Specialist TS 8 variations are also
available such as IP 65, NEMA 4x, EX pressurization and TS 8 for earthquake
zone 1, 2 and 3 to Bellcore. With no internal fixings, access to the side
panels is from inside only, thereby offering additional security. Four
point locking on the front and rear door increases resistance to forced
entry. This rack combines a high level of structural integrity meeting all
industry standards for 482.66mm (19 in.) mounting.
www.rittal.ca
Rittal Systems
CANADIAN PROCESS eNews
